Pouring a concrete slab for the bottom of a water tank.
http://www.redeemersgroup.com | 1-877-619-4491 Watch PolyLEVEL in action and see in real time how it is used to quickly and safely lift a sinking sidewalk! PolyLEVEL is a structural grade…
Warning: Array to string conversion in /home/dunehofa/public_html/grandjunctionconcrete.com/wp-includes/class-wp-query.php on line 3605
no insulation and no proper foundation ,our building control officer would
make you break it up and start again LOL,good to see how its done elsewhere
.
What a poor job, you can kill someone with Rebar sitting exposed like
that…place some mushroom caps, or how about some work gloves, or hart hat
or reflective vest or steel toe boots or safety glasses…poor.
If you don’t want to buy caps for each piece of rebar, buy carnie caps.
That way you can just use scrap 2×4.
hope you guys vibrated those edges.
been in construction 40 years eveybody is an expert haaa haa
just ask them
no vibrator, barley any bottom steel if any, guys using a come along on
1/4in of concrete on mesh wire and those blocks man so much waste… Boston
dose not approve also screw rebar caps dunikin donuts cups or insulation do
the same thing
I thought the same thing NO REBAR CAPS
Just a tip, I don’t know if it has already been mentioned, but you should
tie a lace bar across your starter bars to keep them all even and 90
degrees to the slab, makes the next blokes job easier and quicker, which
gives you a good name around town, good mesh and foundation work, clarky
from caloundra qld Australia.
most too wet , no vibrators to consolidate, there for higher slump better
than voids, as for the caps on rebar?/ nice in perfect world lol, seem
12 inches thick so hope was plasterer make it loose, oh have one not in
shots hahhaa, coes lot of good in truck at the shop, ahahha , after all
the whining better than most ahhaaa, similar to 8 million galon slabs for
garland texas 1983 , we found dead guy in the old tanks, garland texas
drank him only bone s left , city water ..
So much wrong with this jobsite. No safety. No rebar caps. No PPE EITHER
Nice rebar work for sure.
funky looking water tank and not much lap out of concrete for the rebar
maybe a foot? weird probably backwoods southern boy construction lol
Such dramatic music for pouring concrete. Thumbs down for bad music choice.
Scubs! Pro union
muito bom
why dont you stand a 2×4 up on edge down the line where your upright rebar
is and mark your layout on the 2×4 and bend a 16 around the upright must
of took days to make all those blocks then just cut them all lol
No vibrator? I’ve never seen so much concrete poured without means to
settle the aggregate.
Why you finishing the bottom of a water tank? I must be missing something
here.
All these small woods un the top of the molding around, you use them like
gide to give you the level concrete base?
At about 2:19 I started having flashbacks to 2 girls 1 cup.
Thanks for sharing. Don’t you runt into cracking issues when a slab is that
big? I thought you are supposed to segment large slabs to allow for
expansion/contraction.
Obviosly the pump with the Hyra lift truck LOL. But we wheelbarrow the
stuff as muuch as possible especially if there is enough guys around to do
it. Its all about saving money at the end of the day. The supers make us
work hard.
@lilbubka It was for the water catchment tank 18.000 gal